 |
 |
 |
 |
| Titanium Stab links from Tower (Associated
CAR part!!) |
Stab mounts with two tab/screw configuration
on alum. tube |
Airwild 1.5" arms on Hitec 5955TG's,
Dubro HD hardware. SLOP FREE!!! |
Bare firewall - alum bracket included! |
|
|
|
 |
| Front left view of Brillelli 60 cc showing
off the beautiful custom muffler and head-machining
|
"Business" end... Walbro HDA carb
standard, comes with throttle arm. Note my servo operated choke.
|
Beautiful polished custom CNC crankcase.
|
Another view of the beauty.
|
|
|
|
 |
| Right front cowl view. It is a
beautiful nose. |
Left front lower view showing head opening |
Bottom view showing head and air intake
area. |
Bottom view showing exhaust area cutouts in
cowl |
 |
 |
 |
 |
| Pilot - From Chief "Lifelike
Pilots" |
Shoulder view. Dash sticker from GP
Ultimate |
Aft fuse interior, showing MPI Extensions for
elevators |
RX installation, velcro over foam, on ply
plate glued to stringers. |
 |
 |
 |
 |
| Rudder servo arm - stock - supplied in kit,
Dubro 4-40 Ball links |
Twin RX batts, 1500mah, 5 cells each, NiCad,
twin MPI Switches |
Stock 750cc tank location. |
Throttle servo install, JR 537 |
 |
 |
|
|
| Tail close up. Sullivan HD tailwheel
bracket, Dubro tailwheel, and my custom restraint plate installed. |
Tailwheel/Rudder tiller bar |
|
|
| |
|
|
|
| |
|
|
|
 |
 |
 |
 |
| |
|
|
|