Dual-Elevator Mixing

The TX can do dual elevators easily.  The ONLY mixes that "master" trim into BOTH channels are Mix 5 and 6.  Use one of them.

Doing dual elevators, the "elevator" Travel adjust sets BOTH as soon as the mixing is turned ON, and the second channel (AUX2) travel adjust will have NO effect.  It's supposed to work that way.

Both channel "sub trims" ***DO*** work, and may be used to fine tune centers, if you cannot do it mechanically.

If you cannot get identical travel mechanically after Mixing is setup, set the OVERALL deflection using the "Elevator" Travel ATV.

Adjust the "MIX Volume" (percents in the Mix function) to alter the SECOND channel, either less than 100% or up to +125% of throw.  This adjustability SHOULD get all but the crappiest dual elevator setups matched.

You WILL find that the elevator halves track much more closely with the DX 7.  You may not "see" it, or "feel" it, but it's there.  It is decreased "latency" and has been designed in to how the TX sends those channels to the RX, and the timing of the pulses.

It's tighter, faster, and better than any others I have ever had.

Use this radio with programmable Hitec 5955TG's and you will think you've gone to RC Heaven!!!