Resurfacing your countertops is a more affordable choice to changing them, as well as if you are a DIY fanatic some countertops can be resurfaced with devices as well as products found on most large DIY shops. If you have actually laminated countertops, resurfacing them in your home involves replacing the leading Formica layer, cleansing the adhesive and also gluing a new laminate sheet in addition to the plywood base. However, maintain the complying with in mind:
– Stay clear of cutting the laminate too small
The initial step to resurface your laminate countertops is cutting the new layer of laminate to the ideal dimension. This is easier to do if you sketch the form of your counter top base on the back of it.
– Do not go at it alone
Holding a laminate sheet covered in glue while aiming to make it fit specifically on top of your old kitchen counter is difficult, and also doing it alone is a dish for disaster. Laminate sheets can break if, as an example, you flex it way too much, wasting your money as well as compeling you to start again. Resurfacing your countertops with the help of a close friend or family member is a lot easier. It will also enable you to stay clear of blisters when gluing the two surfaces with each other.
– Bubbles and Bumps are the enemy
There’s nothing that shout “careless task” louder compared to a kitchen area surface filled with bubbles as well as bumps, as well as unfortunately enough laminate countertops are prone to them. Make certain the glue is spread out generously however equally throughout the surfaces you plan to adhesive, and make use of a J-Roller to make certain there are no air bubbles as you glue the new surface area to the base. Slow and constant gets the job done, aiming to simply push the two surfaces together as well as do a fast work normally doesn’t work.
Other Collections of Tips For Resurfacing Your Countertop